Technical Sheet
|
Discover the exceptional qualities of APG's C-5400 gasket material, featuring synthetic fiber and SBR binder reinforcement. This premium sheet ensures chemical stability and superior sealing capabilities across various applications, including refrigerants, oils, gas, and fuels. Manufactured with reinforced synthetic fibers and a neoprene binder, this material finds use in diverse industries, from petrochemical and mining to transportation and paper manufacturing. |
 |
Key Attributes of Synthetic Fiber Sheets With SBR Binder
- High-Performance Premium Sheet: APG's C-5400 gasket material excels in providing reliable seals for a range of substances.
- Chemically Stable: This material's chemical stability ensures optimal performance across various applications.
- Synthetic Fiber and SBR Binder Reinforcement: The inclusion of synthetic fibers and an SBR binder enhances the material's strength and sealing properties.
- Versatile Applications: C-5400 serves well in industries such as petrochemical, mining, transportation, and paper manufacturing.
- Wide Range of Uses: Its sealing capabilities extend to refrigerants, oils, gases, and fuels, meeting diverse industry needs.
Product Specifications
Typical Values Refer to 1/16'' Thick Material Unless Noted
| Creep relaxation ASTM F38B (1/32") | 25 % |
| Sealability ASTM F37 A (1 /32") | < 0.2 ml/hr |
| Gas Permeability DIN 3535/6 | < 0.5 ml/min |
| Compressibility ASTM F36J | 7 - 15 % |
| Recovery ASTM F36J | 50 % minimum |
| KLINGER Hot Compression Test | |
| 1 Thickness Decrease 73°F (23°C) | 1 13 % initial |
| 2 Thickness Decrease 392° F (200°C) | 2 23 % additional |
| Weight increase ASTM F146 after immersion in | |
| Fuel B, 5h/73°F (23°C) |
15 % maximum |
| Thickness Increase ASTM F146 after immersion in | |
| 1 ASTM Oil IRM 901, 5h/300°F (149°C) | 1 0 - 5 % |
| 2 ASTM Oil IRM 903, 5h/300°F (149°C) | 2 5 - 20 % |
| 3 ASTM Fuel A, 5h/73°F (23°C) | 3 0 - 5 % |
| 4 ASTM Fuel B, 5h/73°F (23°C) | 4 0 - 10 % |
| Dielectric Strength ASTM 0149-95a | 18 kV/mm |
| Density ASTM F1315 | 106 lb/ft ³ (1.7 g/cc ³) |
| Leachable Chloride Content FSA Method | 500 ppm |
| ASTM F104 Line Call Out | F712232B3E22K6M5 |
| Color | Black or White |
Pressure/Temperature Graphs
The pressure/temperature graphs shown are the most current method of determining the suitability of a gasket material in a known environment. However, chemical compatibility must also be considered.
pT diagram for thickness 1/16":
Gases & Steam
Liquids
In area 1 the gasket material is suitable using common installment practices subject to chemical compatibility.
In area 2 appropriate measures are necessary for installation of the gasket to ensure maximum performance.
In area 3 do not install gaskets in these applications without first contacting APG for technical support service.