C-6400 - Synthetic Fiber Sheets With SBR Binder

Technical Sheet

APG's C-6400 - Synthetic Fiber Sheets with SBR Binder gasket material is a good steam sheet with good anti-stick properties.

Use this material in process industries such as pulp and paper, power, and petrochemical.

This material is manufactured with synthetic fiber reinforced with an SBR binder.

C-6400-White

 

Features & Applications

Features

  • Synthetic Fiber

  • Neoprene Biner Reinforcement

Applications

  • Pulp / Paper

  • Power

  • Petrochemical

 

Product Specifications

Typical Values Refer to 1/16'' Thick Material Unless Noted

Creep relaxation ASTM F38B (1/32") 20 %
Sealability ASTM F37 A (1 /32") < 0.2 ml/hr
Gas Permeability DIN 3535/6 < 0.3 ml/min
Compressibility ASTM F36J 8 - 14 %
Recovery ASTM F36J 50 % minimum
KLINGER Hot Compression Test  
1 Thickness Decrease 73°F (23°C) 1 12 % initial
2 Thickness Decrease 392° F (200°C) 2 14 % additional
Weight increase ASTM F146 after immersion in  
Fuel B, 5h/73°F (23°C)
25 % maximum
Thickness Increase ASTM F146 after immersion in  
1 ASTM Oil IRM 901, 5h/300°F (149°C)  1 0 - 10 % 
2 ASTM Oil IRM 903, 5h/300°F (149°C) 2 0 - 25 %
3 ASTM Fuel A, 5h/73°F (23°C) 3 0 - 5 %
4 ASTM Fuel B, 5h/73°F (23°C) 4 0 - 10 %
Dielectric Strength ASTM 0149-95a 16 kV/mm
Density ASTM F1315 112 lb/ft ³ (1.8 g/cc ³)
Leachable Chloride Content FSA Method 200 ppm
ASTM F104 Line Call Out F71241B3E42K6M5
Color Black or White

 

DOWNLOAD SPEC SHEET

 

Pressure/Temperature Graphs

The pressure/temperature graphs shown are the most current method of determining the suitability of a gasket material in a known environment. However, chemical compatibility must also be considered.

pT diagram for thickness 1/16":

Gases & Steam

C-6400 G&S

Liquids

C-6400 liquids

 

In area 1 the gasket material is suitable using common installment practices subject to chemical compatibility.

In area 2 appropriate measures are necessary for installation of the gasket to ensure maximum performance.

In area 3 do not install gaskets in these applications without first contacting APG for technical support service.