Non-Asbestos Sheet Materials
      Back to home
      1. Help Center
      2. Gasket Sheet Materials
      3. Non-Asbestos Sheet Materials

      C-5400 - Synthetic Fiber Sheets with Neoprene Binder

      Technical Sheet

      APG's C-5400 - Synthetic Fiber Sheets with Neoprene Binder gasket material is a high-performance premium sheet that is chemically stable and provides excellent sealability in many applications including refrigerants, oils, gas, and fuels.

      This material is manufactured with synthetic fibers reinforced with a neoprene binder.

      		 5400b

       

      Features & Applications

      Features

      • Synthetic Fiber

      • SBR Biner Reinforcement

      Applications

      • Petrochemical / Chemical

      • Mining / Steel / Aerospace

      • Transportation / Railcar

      • Paper / Pulp

      Product Specifications

      Typical Values Refer to 1/16'' Thick Material Unless Noted

      Creep relaxation ASTM F38B (1/32") 25 %
      Sealability ASTM F37 A (1 /32") < 0.2 ml/hr
      Gas Permeability DIN 3535/6 < 0.5 ml/min
      Compressibility ASTM F36J 7 - 15 %
      Recovery ASTM F36J 50 % minimum
      KLINGER Hot Compression Test  
      1 Thickness Decrease 73°F (23°C) 1 13 % initial
      2 Thickness Decrease 392° F (200°C) 2 23 % additional
      Weight increase ASTM F146 after immersion in  
      Fuel B, 5h/73°F (23°C)
      		 15 % maximum
      Thickness Increase ASTM F146 after immersion in  
      1 ASTM Oil IRM 901, 5h/300°F (149°C)  1 0 - 5 % 
      2 ASTM Oil IRM 903, 5h/300°F (149°C) 2 5 - 20 %
      3 ASTM Fuel A, 5h/73°F (23°C) 3 0 - 5 %
      4 ASTM Fuel B, 5h/73°F (23°C) 4 0 - 10 %
      Dielectric Strength ASTM 0149-95a 18 kV/mm
      Density ASTM F1315 106 lb/ft ³ (1.7 g/cc ³)
      Leachable Chloride Content FSA Method 500 ppm
      ASTM F104 Line Call Out F712232B3E22K6M5
      Color Black or White

       

      DOWNLOAD SPEC SHEET

      Pressure/Temperature Graphs

      The pressure/temperature graphs shown are the most current method of determining the suitability of a gasket material in a known environment. However, chemical compatibility must also be considered.

      pT diagram for thickness 1/16":

      Gases & Steam

      C-5400 G&S

      Liquids

      C-5400 liquids

      In area 1 the gasket material is suitable using common installment practices subject to chemical compatibility.

      In area 2 appropriate measures are necessary for installation of the gasket to ensure maximum performance.

      In area 3 do not install gaskets in these applications without first contacting APG for technical support service.